AEON Edition 4 – Lounge Hookah – Lemondrop

Categories: , .

AEON Edition 4 – Lounge Hookah – Lemondrop

$399.99

The new AEON Shisha – Edition 4 is the successor to Edition 3 and has been developed & continuously tested over a year. The AEON Shishas are produced in Germany under the highest quality requirements made of V2A stainless steel (1.4305 V2A stainless steel from Switzerland) near Stuttgart and then each component of the AEON Shisha undergoes a strict quality control in our warehouse. The production of the shishas in Germany is carried out with the certification ISO 9001 and ISO 14001 and each thread is checked on site for its fit accuracy. The bowls of the AEON Shisha are hand-blown in elaborate manual work and then checked for the quality in our warehouse and glued with a high-quality 2-component adhesive. If you buy an AEON Shisha, you can be sure to own an absolutely high-quality product that has innovative features and has been produced with a lot of manual work & assembled by us, as we pack every order in our warehouse from the individual parts ourselves and check the quality again.

Out of stock

Delivery of The Edition 4 - Lounge

- Head adapter with M16x1 thread

- Charcoal plate (hand-ground from V2A stainless steel)

- 18/8 cut to M16x1 adapter

- Smoke column with 29/2 cut at the bottom (M14x1 thread inside for attaching to the base) and 18/8 cut on top

- Base with a connection incl. Closed Chamber and blow-out valve at the smoke column

- 1 x hose end piece with shortened 18/8 cut

- 4 x sockets incl. 6mm ball for blowing out

- Diving tube with M14x1 thread on top and bottom

- Bowl with thread


How does Edition 4 Lounge differ from other shishas?

In The Edition 4, we have developed a new blow-out valve that leads the smoke upwards along the column of smoke. This system also works if you attach other columns of smoke to Edition 4 (e.B. with the optional "Base Adapter"). We also offer other smoke columns that are compatible with The Edition 4 and can therefore change the position of the blow-out valve. The entire technology of the blow-out valve is elegantly hidden in the base and barely visible from the outside. The base has a 29/2 cut, which means you can customize the Edition 4 according to your wishes. For example, other smoke columns with 29/2 cut fit easily into the base and you can adjust the appearance of your shisha at any time. The smoke column, which is included in the delivery of the Edition 4, is first inserted into the 29/2 cut of the base and then screwed with the immersive tube with M14x1 thread. Since the smoke column has an 18/8 cut on top, you can also attach a molasses catcher or other components with 18/8 cut and adjust the height of Edition 4 according to your wishes.


How does the Edition 4 Lounge differ from the other Edition 4 variants?

The Edition 4 Lounge is specially designed for use in shisha bars. Few components, a simple design but a modern simple design with a beautiful blow-out valve (as with the other Edition 4 variants) ensure that the Edition 4 - Lounge is a real eye-catcher in every shisha lounge. A diffuser was dispensed with here, because in shishabars one likes to hear the "blubbling" of the shisha. However, a suitable diffuser for Edition 4 is optionally available and can be attached to the immersion tube of the Edition 4 – Lounge without any problems. The column of smoke consists of one part and is left in the base by 29/2 cut and then firmly screwed to the immersive tube, so that the Edition 4 lounge could also be worn on the entire column of smoke. Under the plate there is an 18/8 cut, so that the charcoal plate can be easily removed, for example, for a head change. Molasse catchers could also be attached as needed. A shorter immersion tube could also be attached for the Edition 4, the submersible tubes of the different variants are compatible with each other.

Reviews

There are no reviews yet.

Add a review