VYRO - EVOKE Frozen
GET YOUR FRIENDS READY!
Finally there is a 4-hose hookah from the house of VYRO. The VYRO - EVOKE allows individual venting, and therefore is perfect for smoking with friends as well as for enjoying alone. The VYRO - EVOKE is a modern stainless steel water pipe in a timeless design. The included base comes in the colorways Frozen and Clear. The shape of the base was specially selected for the VYRO - EVOKE, and offers you the optimal ratio of water and smoke volume.
Purge System
To create the perfect smoking experience for you and your friends, a purge system has been installed in the VYRO - EVOKE, through which all 4 users can vent the hookah, even without holding the hose shut manually.
Particularly impressive is the blow-off through the 8 holes, which are installed with a valve in the base. The purge can be activated by manually screwing on one of the 4 ports.
Features of the EVOKE
In order to offer you more flexibility when smoking, a plug-in bowl adapter is included in the scope of delivery, through which the hookah fits on all common plug-in bowls.
To purge and activate the blow-off, simply turn the hose connection to the left. For better draft when smoking, the connection should be closed again after purging. The charcoal plate is very easy to connect due to the 18/8 grind. The downstem is divisible and can thus be used in the short and long version. The diffuser can be unscrewed and screwed on both sides. This way you can adjust the volume of the bubbling sound when inhaling according to your preferences. The charcoal plate has a curvature, whereby deposited coals are protected from slipping, as well as in the safe distance to the bowl gasket.
Technical details of the VYRO - EVOKE
The VYRO - EVOKE is a 54 cm hookah with 4 hose connections and has a weight of about 4.2 kg. Through the use of high-quality V2A stainless steel, the hookah is both stable and resilient, as well as easy to clean and handle.
The smoke column has an inner diameter of 12 mm and is made of solid V2A stainless steel.
In addition, the AEON blind plugs can be inserted into the hose end pieces of the VYRO - EVOKE to close a hose end piece. If, for example, smoke comes out of the other hose end pieces when blowing hard on your VYRO - EVOKE, you can simply insert the blind plugs into the hose end pieces and thus close the hose end pieces so that no more smoke can come out here. The AEON blind plugs are simply pushed into the hose end piece from above. The balls used for the hose connections are 11 mm in size.
The lower, side blow-off is only guaranteed if you use the stainless steel balls 11mm and the small glass balls!
Before using the VYRO - EVOKE, we recommend that you clean it extensively.
IMPORTANT NOTICE:
The bowls are hand blown. Therefore, it may happen that small air bubbles are found in the glass. If you are dissatisfied with your base, please contact us. Please note that we can only exchange your base if the base is unused and the shipping costs are paid by you.
The charcoal plates are hand-brushed, which may cause minor scratches in the surface. These are not a reason for complaint.
Weight: approx. 4.2 kg
Size: approx. 54 cm
Optimum water level: approx. 1200 ml
Scope of delivery of the VYRO - EVOKE Frozen:
- 1x bowl adapter made of V2A stainless steel
- 1x rubber bowl gasket black
- 1x charcoal plate made of V2A stainless steel
- 1x ground joint adapter (18/8 to M16x1) made of V2A stainless steel
- 1x smoke column made of V2A stainless steel
- 1x stem base made of V2A stainless steel with VYRO logo engraving
- 4x hose adapter made of V2A stainless steel
- 4x 11 mm stainless steel ball and 4x 11 mm POM ball
- 4x hose end pieces made of V2A stainless steel
- 4x 5 mm stainless steel ball and 4x 5 mm POM ball
- 1x plug-in base adapter incl. rubber gasket
- 1x divisible downstem made of V2A stainless steel
- 1x diffuser made of V2A stainless steel, screwable on both sides
- 1x base Frozen with V2A stainless steel thread
- 1x high-quality packaging
- 1x enclosure with assembly instructions
